Logos on shirts and polos
Supplier example- Method
- Embroidery
- Trade-off
- Poly-cotton takes embroidery.
- Approve before bulk
- Check placement against the programme.
Loading page content
Loading page content
TextileWays manufactures workwear programmes: corporate and hospitality shirts, healthcare scrubs, work trousers and jackets, and aprons, built to survive frequent commercial laundering and stay consistent across reorders placed years apart.
A workwear buyer is not buying a season, they are buying a programme that has to look identical when a new employee is issued a garment long after the first order. Retained approved samples, locked fabric specifications and recorded colour standards are what make a reorder match the first order, and they matter more than anything visible in a photograph.
Product types
Anything not listed can still be assessed on technical review.
Specification
Weight ranges are typical for this product. The finished weight of your fabric is confirmed on the approved sample rather than guaranteed to a figure.
Ranges are typical. The exact specification is confirmed on your approved sample before production.
Component-level guidance for workwear. Any ranges are indicative sourcing references, not guaranteed order specifications. Different components can need different fabrics, weights and units; the selected materials, construction and finished measurements are confirmed on the approved sample.
| Component | Weight, unit or setting | Construction choices | Check on the sample |
|---|---|---|---|
| Shirting poplinIndustry guidance | 110 to 140 gsm typical range. | Interlined collar. | Shrinkage. |
| Scrub fabricIndustry guidance | 140 to 200 gsm typical range. | Reinforced seams. | Industrial laundering. |
| Apron canvasIndustry guidance | 280 to 400 gsm typical range. | Pockets and straps. | Seam strength. |
Decoration
Decoration is matched to the fabric and the artwork rather than applied by default.
Which method suits each placement on workwear, its trade-offs and what to approve before bulk. Compatibility is checked against the actual fabric, stretch, coating and heat tolerance; approval on one component does not establish suitability on another.
Materials
Composition, weight guidance and decoration compatibility for each fabric are on its own page.
What each part of workwear is usually made from, why, where it falls short and what to check. This is industry guidance, not a TextileWays specification: the fabric and components for your order are confirmed on technical review.
Ordering
None of these figures are published as a universal number, because none is true across every specification.
MOQ depends on material availability, colour count, construction and packaging. Workwear fabrics are widely stocked in standard colours, which usually supports lower quantities than fashion categories; corporate colours outside the stock range follow dye house batch minimums.
A wearer trial is recommended before a large programme is committed, since comfort and industrial laundering performance only reveal themselves in use.
Lead time depends on the factors above rather than a single published figure. An indicative schedule is confirmed with your quotation.
Detailed product guidance
Materials, manufacturing routes and buying considerationsWorkwear is bought for durability. Fabric, stitching and closures are chosen for the job and the laundering regime, not for how the garment looks on a hanger, and a programme that fails in the wash costs far more than the garments saved.
Work trousers, jackets, aprons, shirts and service wear are developed with reinforced stress points and fabrics suited to daily wear. The brief starts with where the garment will be worn and how it will be washed.
Scrub tops and trousers are cut for movement, with pocket layouts, stretch and colour fastness agreed on the sample. Fabric choice reflects frequent laundering, and colour consistency matters when staff are issued new sets over time.
A garment that is worn and washed every week needs fabric and stitching that were chosen for that life from the start.
Poly cotton twill is the everyday workwear fabric because it holds shape and colour through repeated washing. Heavier canvas suits trades that need abrasion resistance.
Stress points such as pocket corners and belt loops are reinforced, and seams that take strain are doubled, so the garment fails last where it is pulled most.
Distributors and brands sell workwear under their own name. Your labels, sizing and packaging go on the finished garment.
Your pattern or ours, with labels, trims and packaging to your specification.
A developed workwear or scrub block can be branded with your colours and logo (ODM, often called white label), which suits distributors who want to stock a branded range quickly.
Commercially laundered garments age faster than domestically washed ones, so fabric and construction are specified for the real regime.
Post wash measurements and colour fastness are confirmed on the sample, because an uneven programme looks poor even when each garment is sound.
Logos are applied by embroidery or print, with position and stitch count approved on the sample.
Small programmes can start from approximately 50 pieces per style after technical review, and larger programmes can run beyond 100,000 pieces.
Fit, fabric and logo placement are approved on a sample before bulk production.
Approved samples and colour standards are retained so replacement garments match.
Questions
An approved pre production sample and the signed specification become the reference for repeat orders. Reorders are checked against that reference rather than reinterpreted, which is what keeps a second run consistent with the first. Where a fabric or trim has changed availability, we tell you before production instead of substituting quietly.
We build labelling into the specification and apply exactly what you approve, including fibre content, care symbols, country of origin and identification details. Responsibility for confirming what your market and your product category legally require stays with you as the brand owner. We flag anything that looks inconsistent before production.
Yes. Third party inspection and buyer appointed quality agents are welcome. Tell us the inspection standard and the sampling plan you intend to apply so that the schedule allows time for inspection and, if needed, for rework before shipping.
Pick a design as your starting point. Colours, fabric and branding are set in the quote.
Navy management jacket with gold pipingAsk for this design
Light blue stretch shirt with navy trousersAsk for this design
Navy reception jacket with gold pipingAsk for this design
Navy restaurant and bar shirt with gold trimAsk for this designSampling comes before bulk. From approximately 50 pieces per style, subject to technical review.
Tell us your designShare your product details, target quantity and delivery requirements. We will confirm feasibility, materials and construction before quoting.
Contact our team
