Loading page content
Loading page content
Quality and logistics
Structured checking of finished goods against your approved sample and an agreed acceptance standard, before anything ships.

Inspection compares what was produced against what was approved. For it to mean anything, three things must be agreed in advance: the reference sample, the defect classification, and the sampling plan with its acceptance limits.
We inspect internally and welcome buyer appointed and third party inspectors. Where an independent inspector is used, the schedule allows time both for inspection and for any rework it identifies.
Process
Each stage exists to resolve one question. Skipping a stage moves risk further down the line rather than removing it.
Reference sample, defect classification and sampling plan are agreed in writing.
Checks run during production so problems are caught at source.
Finished goods are inspected against the agreed plan.
The lot is accepted, or rework is defined and re inspected.
Suitability
Where this capability is the right choice, and the materials it is compatible with.
Products
Product pages and families that list this capability, so you can see what it is used for before you ask for a quote.

Outdoor and performance
Custom jackets in leather, quilted, woven, softshell, fleece and windbreaker styles under your own label, with seams, zips and finish approved on a sample.

Denim and woven products
Casual and formal woven shirts in poplin, twill, oxford and flannel under your own label, with collar, cuff and fit approved on a sample before bulk.

Denim and woven products
Brushed cotton flannel shirts in yarn dyed checks made in Pakistan under your own label, with pattern matching and post wash shrinkage approved on a sample.

Outdoor and performance
Full-zip, half-zip and hooded fleece jackets made in Pakistan under your own label, with fabric weight, pilling and zips approved on a sample before bulk.

Children and baby
Baby rompers, bodysuits and sleepsuits made in Pakistan under your own label, with secure snaps, soft seams and testing coordinated for your market.

Streetwear
Custom varsity and letterman jackets made in Pakistan under your own label: melton bodies, leather or PU sleeves and chenille patches, sampled before bulk.

Everyday apparel
Private label clothing in organic cotton and recycled polyester, with the fibre claim named and documented, made in Pakistan from about 50 pieces per style.

Denim and woven products
Private label chinos, cargo and work trousers in twill with reinforced stress points. Fit is confirmed on a proto sample before bulk is cut.

Workwear and uniforms
Private label workwear built to survive commercial laundering: scrubs, shirts, jackets and aprons that match year three to year one on every reorder.
Not limited to these
We manufacture across all 12 product families
The products above are the most requested. Each family below has its own page with construction options, materials and ordering guidance, and anything not listed can still be assessed on technical review.












Focused product pages (56)
Limits
Stated plainly, because a capability described without its constraints will be misapplied to a product it does not suit.
Questions
Yes. Third party inspection and buyer appointed quality agents are welcome. Tell us the inspection standard and the sampling plan you intend to apply so that the schedule allows time for inspection and, if needed, for rework before shipping.
AQL is a statistical sampling method used to decide whether to accept or reject a production lot based on an inspected sample rather than every unit. The inspection level and acceptance limits are commercial decisions that vary by buyer and product. We agree the standard for your order in writing rather than assuming one.
Pick a finished design from our catalogue, then tell us how you want inspection applied to it.
Pink hoodie with small butterfly emblemAsk for this design
Grey washed tee with blue graphic printAsk for this design
Deep teal casual shorts with small logoAsk for this design
Navy restaurant and bar shirt with gold trimAsk for this designSampling comes before bulk. From approximately 50 pieces per style, subject to technical review.
Tell us your designTell us the product, the fabric and the quantity. We will confirm whether this is the right process and what it means for your minimum quantity and schedule.
Contact our team