Loading page content
Loading page content
Design and development
A staged sampling process that turns your specification into a physical garment both sides approve before bulk production is released.

Sampling is the cheapest place to be wrong. A construction problem found on a proto sample costs a few days; the same problem found in bulk costs a production run.
Samples run in stages, each with a specific question to answer. Skipping a stage does not save time overall, it moves risk into production, which is where corrections are most expensive.
If you are looking for a clothing sample developer or a garment prototype maker, this is the service: we turn a sketch, a tech pack or a reference garment into a clothing prototype, then into fit and pre production samples, and bulk starts only after you approve the last one.
Process
Each stage exists to resolve one question. Skipping a stage moves risk further down the line rather than removing it.
Confirms construction and overall direction, often in substitute fabric.
Confirms measurements against the chart in the correct fabric.
Produced where fit or construction comments require it.
Made from bulk fabric with final trims, labels and packaging.
Written approval of the pre production sample releases production.
Suitability
Where this capability is the right choice, and the materials it is compatible with.
Products
Product pages and families that list this capability, so you can see what it is used for before you ask for a quote.

Everyday apparel
Launching a clothing brand? Start from about 50 pieces per style with no tech pack, an NDA before you share designs and a sample approved before bulk.

Everyday apparel
Put your brand on every label. Private label and white label clothing from about 50 pieces per style, up to 100,000+. Tech pack, sampling and packing handled.

Everyday apparel
Start from a sketch, photo or reference garment. Custom private label clothing made to your specification, with an NDA before you share a design.

Denim and woven products
Private label jeans, denim jackets and overshirts with developed washes, from approximately 50 pieces per style, depending on fabric and wash.
Not limited to these
We manufacture across all 12 product families
The products above are the most requested. Each family below has its own page with construction options, materials and ordering guidance, and anything not listed can still be assessed on technical review.












Focused product pages (56)
Limits
Stated plainly, because a capability described without its constraints will be misapplied to a product it does not suit.
Materials
Composition, weight guidance and decoration behaviour for each fabric are on its own page.
Questions
Sampling normally runs in stages: a proto sample to confirm construction, a fit sample against your measurement chart, and a pre production sample that fixes fabric, colour, decoration, labelling and packaging. Each stage needs written approval before the next one starts. Sample charges and courier costs are quoted before work begins.
Lead time is quoted per project rather than published as a single figure. It is driven by fabric availability, dyeing, decoration method, quantity, the number of sample rounds and the destination. We give you an indicative schedule with the quotation and confirm dates once the pre production sample is approved.
No. A tech pack makes quoting faster and more accurate, but a clear description, reference garments, target quantity and target market are enough to start. Where you do not have a specification, we can develop one with you and confirm it in writing before sampling.
Pick a finished design from our catalogue, then tell us how you want sample development applied to it.
Black acid-wash zip hoodieAsk for this design
Black sleeveless top with rib-cage and flame printAsk for this design
Grey-blue jeans with moto panels and repairsAsk for this design
Yellow leather racer jacket with sleeve stripesAsk for this designSampling comes before bulk. From approximately 50 pieces per style, subject to technical review.
Tell us your designTell us the product, the fabric and the quantity. We will confirm whether this is the right process and what it means for your minimum quantity and schedule.
Contact our team