Loading page content
Loading page content
Quality and logistics
Structured checking of finished goods against the approved sample and an agreed acceptance standard.
Inspection compares what was produced against what was approved. For it to mean anything, three things must be agreed in advance: the reference sample, the defect classification, and the sampling plan with its acceptance limits.
We inspect internally and welcome buyer appointed and third party inspectors. Where an independent inspector is used, the schedule allows time both for inspection and for any rework it identifies.
Process
Each stage exists to resolve one question. Skipping a stage moves risk further down the line rather than removing it.
Reference sample, defect classification and sampling plan are agreed in writing.
Checks run during production so problems are caught at source.
Finished goods are inspected against the agreed plan.
The lot is accepted, or rework is defined and re inspected.
Suitability
Where this capability is the right choice, and the materials it is compatible with.
Limits
Stated plainly, because a capability described without its constraints will be misapplied to a product it does not suit.
Questions
Yes. Third party inspection and buyer appointed quality agents are welcome. Tell us the inspection standard and the sampling plan you intend to apply so that the schedule allows time for inspection and, if needed, for rework before shipping.
AQL is a statistical sampling method used to decide whether to accept or reject a production lot based on an inspected sample rather than every unit. The inspection level and acceptance limits are commercial decisions that vary by buyer and product. We agree the standard for your order in writing rather than assuming one.
Tell us the product, the fabric and the quantity. We will confirm whether this is the right process and what it means for your minimum quantity and schedule.