Loading page content
Loading page content
Manufacturing
Weaves shirting, twill, denim and canvas to your construction, where structure is set at the loom and cannot be changed later.

Woven fabric behaves differently from knitted fabric at every stage. It does not stretch on its own, it frays, and its pattern is fixed at the loom rather than applied later, which changes both minimum quantities and lead times.
Yarn dyed patterns such as stripes and checks are the clearest example: the colour arrangement is built into the warp, so a pattern change is a new weaving run rather than a finishing decision.
Process
Each stage exists to resolve one question. Skipping a stage moves risk further down the line rather than removing it.
Weave, yarn count, ends and picks are specified for the target hand and weight.
The warp is prepared, including colour arrangement for yarn dyed patterns.
Fabric is woven with in process checks for defects and width.
Greige fabric is inspected before finishing.
Suitability
Where this capability is the right choice, and the materials it is compatible with.
Products
Product pages and families that list this capability, so you can see what it is used for before you ask for a quote.

Denim and woven products
Casual and formal woven shirts in poplin, twill, oxford and flannel under your own label, with collar, cuff and fit approved on a sample before bulk.

Everyday apparel
Shirt dresses, wrap dresses, knit and tiered dresses made in Pakistan under your own label, with fit, lining and zips approved on a sample before bulk.

Denim and woven products
Woven blouses, button shirts and knit tops for women made in Pakistan under your own label, with fit, darts and collar construction approved on a sample.

Denim and woven products
Brushed cotton flannel shirts in yarn dyed checks made in Pakistan under your own label, with pattern matching and post wash shrinkage approved on a sample.

Product family
Woven shirts, trousers, overshirts and jackets, plus denim, where pattern accuracy and finishing define the result.
Not limited to these
We manufacture across all 12 product families
The products above are the most requested. Each family below has its own page with construction options, materials and ordering guidance, and anything not listed can still be assessed on technical review.












Focused product pages (56)
Limits
Stated plainly, because a capability described without its constraints will be misapplied to a product it does not suit.
Materials
Composition, weight guidance and decoration behaviour for each fabric are on its own page.
Questions
Minimum order quantity depends on material availability, colour count, construction, decoration and packaging. Projects can begin from approximately 50 pieces per style following technical review. Where a fabric has to be knitted or dyed specifically for a project, the practical minimum is set by the mill rather than by us, and we tell you that before you commit.
GSM describes fabric weight in grams per square metre. The same nominal fabric can finish at different weights depending on yarn count, knit or weave structure, dyeing and finishing. We publish typical ranges for guidance and confirm the actual finished weight for your approved quality on the sample.
Pick a finished design from our catalogue, then tell us how you want weaving applied to it.
Light blue stretch shirt with navy trousersAsk for this design
Deep teal casual shorts with small logoAsk for this design
Navy reception jacket with gold pipingAsk for this design
Grey-blue jeans with moto panels and repairsAsk for this designSampling comes before bulk. From approximately 50 pieces per style, subject to technical review.
Tell us your designTell us the product, the fabric and the quantity. We will confirm whether this is the right process and what it means for your minimum quantity and schedule.
Contact our team